We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Dust collector blow disc.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Dust collector blow disc - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Dust collector blow disc Product List

1～3 item / All 3 items

Displayed results
0689 Measures for Hanging Storage of Crushed Urethane Products

0689 Measures for Hanging Storage of Crushed Urethane Products

Proposals for measures regarding configuration and control, along with a case where the troubles with shelf hanging were resolved.

We would like to introduce a case where "Brodisk" was adopted in a recycling-related plant. The customer consulted us about wanting to install this equipment at the discharge section of a large dust collector (above the discharge screw) due to the occurrence of shelf hanging. After detailed discussions, we provided a countermeasure proposal, and based on this proposal, the equipment was introduced, resolving the customer's issue. [Case Overview] ■ Dust Collector Hopper Dimensions: 2000×6000 ■ Brodisk Arrangement - 12 units on 2 sides along the discharge screw (slightly above the screw) ■ Brodisk Control - A controller with 6 built-in solenoid valves is used - 24 Brodisks are aerated in groups of 4 with a time delay *For more details, please download the PDF or feel free to contact us.

  • Other powder equipment
  • Dust collector blow disc

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0660 At the foundry sand regeneration facility

0660 At the foundry sand regeneration facility

Most cases, such as bridges and rat holes, can be easily resolved with this equipment!

We would like to introduce a case where "Blow Disks" were installed in a hopper (dust collector) that generates fine dust during the regeneration of foundry sand. The issue was that the fine dust easily absorbed moisture, causing bridging when stored in the dust collector hopper, making it impossible to discharge. We provided information on the arrangement and control of this equipment tailored to the customer's usage conditions, and after detailed discussions, it was implemented. The results have been excellent, with no bridging occurring at all. 【Overview of Arrangement and Control】 - A total of 8 Blow Disks (standard type BD-15) were installed, with 4 in the lower section and 4 in the upper section. The lower section was arranged in the left, right, and center, while the upper section had the 4 disks positioned towards the corners. - The 8 Blow Disks were sequentially aerated in pairs with a time delay using a controller (C-SV4) that incorporates 4 solenoid valves. *For more details, please refer to the PDF document or feel free to contact us.

  • Mixer/agitator
  • Dust collector blow disc

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resolve the clogging of resin cutting powder (preliminary check conducted through lending).

Resolve the clogging of resin cutting powder (preliminary check conducted through lending).

We provide assistance with model selection and layout planning, as well as free loan of this equipment!

We would like to introduce a case where a user already using the "Brodisk" requested a loan of our product. The user has been using Brodisk for many years across several devices, and the model and configuration have been determined. However, they wanted to try a different method of air control, so we lent them four Brodisk units (Type 15). The four Brodisk units were manually turned on simultaneously without any issues, successfully resolving the blockage of cutting powder. As a result, they decided to implement the plan to turn on all four Brodisk units at the same time, which is a cost-effective solution. 【Usage Overview】 ■ Installation Location: Dust Collector Discharge Section ■ Dust Collector Hopper Dimensions: Approximately 1100 x Approximately 1100 ■ Hopper Discharge Section Dimensions: Ø200 ■ Target Material: Resin Cutting Powder *For more details, please download the PDF or feel free to contact us.

  • Other powder equipment
  • Mixer/agitator
  • Dust collector blow disc

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Dust collector blow disc

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.